Block Fence Contractor - (916) 502-9270
|
Block fences are great features as they enclose your home perimeter and help keep off trespassers. A block fence construction should be based on two particular things; the height of the fence and the loads exerted on it by winds. In windy regions, a block fence contractor will construct the block fence in accordance to the required codes for that particular project.
Call (916) 502-9270 now for free quotes. Sometimes the wind speeds might be inaccurate or might have changed over time due to several factors. For this reason, the block fence contractor will have to calculate and carry further analysis to ensure that the block fence won’t fail. We are a block fence contractor in Roseville which specializes in the following types of block fences: √ Concrete Block Fence A concrete block can be inclusive of mortar or without it. In the case of a concrete block fence with mortar, there are three types. They are:
Contact (916) 502-9270 now for for free quotes and estimates. |
|
|
|
More on Block Fence Contractor - Roseville, CA
For concrete block fences without mortar, they depend on gravity and interlocking to keep them upright and intact. These walls are rather short in height and are preferred for their beauty which is brought by different colors. These walls have been in existence for centuries, way before the use of mortar.
√ Already-cast Concrete Fences
These fences or walls are already made before they reach the site. What follows is their installation by the block fence contractor.
Building the block fence.
1. Establishing the footing
This is the initial step for the project. The footing should be wider in width than the block fence itself. To know the precise measurements, one should find out the codes for its construction.
2. Placing initial blocks.
The first line of blocks is laid down with enough space left in between for the mortar. The mortal is fed horizontally and vertically. The space made depends on the size of the blocks being used for construction.
3. Chalk line.
We use a chalk line for reference.
4. Placing mortar.
We first wet the footing thereafter placing an inch of mortar layer on it. We use a trowel to conduct this exercise. Afterwards, we trim the excess mortar and press another line of blocks on top. These goes on until we complete the wall.
Since we cannot exhaust every detail we have on your project, take the initiative to call or approach us with your marvelous insights here in Roseville. We provide the best concrete masonry services from walkways to your walls. Call (916) 502-9270 now for free quotes and estimates.
√ Already-cast Concrete Fences
These fences or walls are already made before they reach the site. What follows is their installation by the block fence contractor.
Building the block fence.
1. Establishing the footing
This is the initial step for the project. The footing should be wider in width than the block fence itself. To know the precise measurements, one should find out the codes for its construction.
2. Placing initial blocks.
The first line of blocks is laid down with enough space left in between for the mortar. The mortal is fed horizontally and vertically. The space made depends on the size of the blocks being used for construction.
3. Chalk line.
We use a chalk line for reference.
4. Placing mortar.
We first wet the footing thereafter placing an inch of mortar layer on it. We use a trowel to conduct this exercise. Afterwards, we trim the excess mortar and press another line of blocks on top. These goes on until we complete the wall.
Since we cannot exhaust every detail we have on your project, take the initiative to call or approach us with your marvelous insights here in Roseville. We provide the best concrete masonry services from walkways to your walls. Call (916) 502-9270 now for free quotes and estimates.